Caja de combinación

From Open Source Solar Project
Revision as of 14:20, 10 February 2021 by Alex (talk | contribs) (Created page with "File:Combinerboxpos201103.png|thumb|right|Un ejemplo de una caja combinadora con tres cadenas de PV (rojo y negro) y una tierra que ingresa desde la fuente PV. Estas cadenas...")
Jump to navigation Jump to search
Other languages:
English • ‎español
Un ejemplo de una caja combinadora con tres cadenas de PV (rojo y negro) y una tierra que ingresa desde la fuente PV. Estas cadenas FV pasan a través de disyuntores que sirven como protección contra sobrecorriente antes de combinarse en un solo circuito de mayor tamaño de cable que sale por un conducto.

Combiner boxes are used to bring together series strings of modules with parallel connections, to transition to larger or different wire types and to serve as an equipment disconnect for the PV source. A combiner box with 3 or more parallel strings should also include Overcurrent protection devices as a short circuit could result in all of the current of the other series strings feed through the string with the fault. A combiner box could be as simple as a basic junction box with wire nuts to a pre-manufactured box with multiple overcurrent protection devices and a remote disconnection switch.

Combiner boxes are typically installed outdoors and should therefore be designed to properly withstand the conditions in which they will be installed - see weather ratings for more information. For a combiner box to be properly watertight, it is also necessary that the proper connectors are used.

Notes/references