Difference between revisions of "Outlet/es"

From Open Source Solar Project
Jump to navigation Jump to search
(Created page with "Tomacorriente/enchufe")
 
(Created page with "File:Wiredoutlet2001011.png|thumb|'''Un tomacorriente típico en las Américas.' '' <br /> ''(1)'' Vista frontal del tomacorriente sin tapa. ''(2)'' Vista lateral del tomaco...")
Line 1: Line 1:
 
[[Category:Power distribution]]
 
[[Category:Power distribution]]
 
<languages />
 
<languages />
[[File:Wiredoutlet2001011.png|thumb|'''An outlet common to the Americas.'''<br />''(1)'' Front view of the outlet without a cover. ''(2)'' Side view of the outlet without a cover. ''(3)'' Incoming circuit wiring for the outlet. ''(4)'' Outgoing circuit wiring for another outlet that is connected in parallel.]]
+
[[File:Wiredoutlet2001011.png|thumb|'''Un tomacorriente típico en las Américas.' '' <br /> ''(1)'' Vista frontal del tomacorriente sin tapa. ''(2)'' Vista lateral del tomacorriente sin tapa. ''(3)'' Cableado que viene de la fuente de energía. ''(4)''Cableado que va a un otro tomacorriente conectado en paralelo.]]
  
 
Outlets allow alternating current appliances to be safely connected and disconnected. Outlet design varies between countries, but the overall concept remains is the same for most residential circuits: there are either two pins (a circuit) or three pins (a circuit plus ground). As outlet designs vary between countries, the proper method for wiring and installing outlets will vary.
 
Outlets allow alternating current appliances to be safely connected and disconnected. Outlet design varies between countries, but the overall concept remains is the same for most residential circuits: there are either two pins (a circuit) or three pins (a circuit plus ground). As outlet designs vary between countries, the proper method for wiring and installing outlets will vary.

Revision as of 08:54, 13 February 2021

Other languages:
English • ‎español
'Un tomacorriente típico en las Américas.'
(1) Vista frontal del tomacorriente sin tapa. (2) Vista lateral del tomacorriente sin tapa. (3) Cableado que viene de la fuente de energía. (4)Cableado que va a un otro tomacorriente conectado en paralelo.

Outlets allow alternating current appliances to be safely connected and disconnected. Outlet design varies between countries, but the overall concept remains is the same for most residential circuits: there are either two pins (a circuit) or three pins (a circuit plus ground). As outlet designs vary between countries, the proper method for wiring and installing outlets will vary.

For examples of how to wire basic load circuits see - Special:MyLanguage/Wiring basic load circuits.

Considerations

  • Outlets typically have multiple connection points for both wires of a circuit - this allows outlets to be easily connected in parallel.
  • Outlets should always be installed in a junction box or other type of enclosure to ensure that all live metal parts are protected. If they are going to be installed outdoors, they must be installed in a suitable outdoor rated enclosure.
  • If a system has an AC system ground then an equipment ground must be run to all outlets and the outlets should have three pins in order to provide a ground for user safety.
  • Outlets should not be installed in locations where they will be exposed to water or else a residual current device must be installed to reduce the risk of electric shock.
  • Connecting stranded wire to some types of outlets must be done very carefully to create a proper connection with no stray strands of wire.
  • Ensure that all wires are properly attached to the outlet by tugging on them after tightening the screws on the outlet.

Notes/references