Weather rating/es

El equipo eléctrico que viene en un gabinete y los gabinetes destinados a equipos eléctricos de cualquier tipo se clasifican a base de la protección que el gabinete puede proporcionar contra el contacto accidental y los daños por la entrada de agua u objetos. Es importante verificar la clasificación de cualquier gabinete que se esté considerando para asegurarse de que sea adecuado para la ubicación o instalacion en la que se instalará el equipo. Hay dos sistemas de clasificación diferentes que se utilizan comúnmente a nivel mundial: National Electrical Manufacturers Association (NEMA) de los EEUU y Protección de Ingreso (IP). Los dos sistemas son muy similares, pero no es posible crear una equivalencia directa entre los dos.

Clasificación IP

Un conjunto de estándares creados por la Comisión Electrotécnica Internacional (IEC). A veces también se lo conoce como el código de protección de ingreso (IPC). El código puede contener otras letras y números además de los dos primeros, pero estos no son relevantes para el diseño e instalación de sistemas FV autónomos. El primer carácter después de las letras IP significa la protección que proporciona la carcasa contra la entrada de cuerpos extraños y la protección de las personas frente a partes peligrosas. El segundo carácter después de IP significa la protección que proporciona el recinto contra la entrada de humedad.

Ejemplo 1: Un envolvente tiene una clasificación de IP 65. ¿Qué nivel de protección ofrece?

• 6 significa que está clasificado como totalmente protegido contra polvo.
• 5 Protegido contra chorros de agua a baja presión de todas las direcciones - entrada limitada permitida

Sistema de clasificación IP:
1ra letra - protección contra partículas sólidas.
2da letra - protección contra líquidos.

Code letters	First characteristic numeral: Solid particle protection	Second digit: Liquid ingress protection
IP (Ingress Protection)	Single numeral: 0–6 or letter X	Single numeral: 0–8 or letter X
Mandatory	Mandatory	Mandatory

Solid particle protection

The first digit indicates the degree of protection (of people) from hazardous parts, as well as the protection of enclosed equipment from foreign bodies.

Level sized	Effective against	Description
X	—	X means there is no data available to specify a protection rating with regard to this criterion.
0	—	No protection against contact and ingress of objects
1	50mm	Any large surface of the body, such as the back of a hand, but no protection against deliberate contact with a body part
2	12.5mm	Fingers or similar objects
3	2.5mm	Tools, thick wires, etc.
4	1mm	Most wires, slender screws, large ants etc.
5	Dust protected	Ingress of dust is not entirely prevented, but it must not enter in sufficient quantity to interfere with the satisfactory operation of the equipment.
6	Dust-tight	No ingress of dust; complete protection against contact (dust-tight). A vacuum must be applied. Test duration of up to 8 hours based on airflow.

Liquid ingress protection

The second defines the protection level that the enclosure enjoys from various forms of moisture (drips, sprays, submersion etc).

Level	Protection against
X	X means there is no data available to specify a protection rating with regard to these criteria.
0	No protection against ingress of water
1	Dripping water
2	Dripping water when tilted at 15°
3	Spraying water
4	Splashing of water
5	Water jets
6	Powerful water jets
6K	Powerful water jets with increased pressure
7	Immersion, up to 1m depth
8	Immersion, 1m or more depth
9K	Powerful high-temperature water jets

NEMA rating

The National Equipment Manufacturers Association (NEMA) rating system is primarily used in North America as the national electrical codes mandate that the NEMA rating system is used. The NEMA rating system differs from the IP rating system in that increasing numbers do not signify that the enclosure offers better protection than the number that proceeds it. For example, types 3, 4 and 6 are intended for outdoor use, but type 5 is not. Equipment for off-grid PV systems will fall into ratings 1-5.

Example 1: An enclosure is rated NEMA 3X. What level of protection does it offer and can it be used indoors?

• A NEMA rating of 3 signifies that it is protected against falling dirt and windblown dust, against weather hazards such as rain, sleet and snow, and is undamaged by the formation of ice. A rating of X means that it carries additional protection against corrosion from salt water.
• Its ratings exceed what is needed for indoor installation, therefore it is acceptable to use.

NEMA Type	Definition
1	General-purpose. Protects against dust, light, and indirect splashing but is not dust-tight; primarily prevents contact with live parts; used indoors and under normal atmospheric conditions.
2	Drip-tight. Similar to Type 1 but with addition of drip shields; used where condensation may be severe (as in cooling and laundry rooms).
3	Weather-resistant. Protects against falling dirt and windblown dust, against weather hazards such as rain, sleet and snow, and is undamaged by the formation of ice. Used outdoors on ship docks, in construction work, and in tunnels and subways.
3R	As 3, but omits protection against windblown dust.
3S	As 3, but also operable when laden with ice.
3X, 3RX, 3SX	X indicates additional corrosion protection; commonly used near salt water.
4 and 4X	Watertight. Used outdoors on ship docks, in dairies, in wastewater treatment plants and breweries. X (as 4X) indicates additional corrosion resistance.
5	Dust-tight. Provided with gaskets or equivalent to exclude dust; used in steel mills and cement plants.
6 and 6P	Submersible. Design depends on specified conditions of pressure and time; submersible in water or oil; used in quarries, mines, and manholes. 6 is temporarily submersible, 6P withstands occasional prolonged submersion. Neither are intended for continuous submersion.
7	Certified and labelled for use in locations where specific fire or explosion hazards may exist.
8	Certified and labeled for indoor and outdoor use in locations where specific fire or explosion hazards may exist.
9	Certified and labelled for indoor and outdoor use in locations where specific fire or explosion hazards may exist.
10	Meets specific requires for use in mining applications in the United States.
11	General-purpose. Protects against the corrosive effects of liquids and gases. Meets drip and corrosion-resistance tests.
12 and 12K	General-purpose. Intended for indoor use, provides some protection against dust, falling dirt, and dripping non-corrosive liquids. Meets drip, dust, and rust resistance tests.
13	General-purpose. Primarily used to provide protection against dust, spraying of water and non-corrosive coolants. Meets oil exclusion and rust resistance design tests.