Weather and solar resource evaluation/es

Un mapa del irradiación global horizontal (GHI) in kWh/m² lo cual es equivalente a la medida Hora Solar Pico (HSP). GHI no tiene en cuenta la inclinación y orientación.

La temperatura y la insolación determinan en gran medida la producción de energía de la fuente FV. La temperatura afecta el rendimiento de todos los componentes de un sistema FV autónomo, en casi todos los casos de manera negativa. Al diseñar un sistema FV autónomo, las condiciones bajo las cuales funcionará un sistema se tendrán en cuenta en el diseño para asegurarse de que el sistema aún pueda suministrar energía cuando sea necesario, incluso en las peores condiciones climáticas y de recursos solares.

La información sobre el clima y los recursos solares de una ubicación es más precisa cuando se obtiene de una estación meteorológica cercana que tiene muchos años de datos registrados que se pueden analizar a nivel de días. El clima y los recursos solares pueden variar significativamente de un año a otro y, en el caso del diseño de un sistema FV autónomo, los meses con el peor clima son los más importantes. Los datos meteorológicos y de recursos solares están fácilmente disponibles en el internet, aunque hay copias impresas de esta información para algunos lugares. Rara vez hay datos meteorológicos locales y de recursos solares para ubicaciones remotas donde tienden a instalarse sistemas FV autónomos, lo que significa que la información debe utilizarse del sitio más cercano, que puede estar bastante lejos, o puede obtenerse de una organización que proporcione estimaciones basadas en modelos informáticos. No existe una fuente única y definitiva de información que cubra todo el mundo y esté disponible en muchos idiomas, aunque hay algunos recursos que alcanzan esta idea. Estos se explorarán a continuación.

Hay recursos adicionales disponibles, consulte - Recursos y las páginas dedicadas a países específicos.

Temperatura

Hay varios valores importantes que deben determinarse para poder diseñar un sistema FV correctamente:

Maximum ambient temperature

For PV source and charge controller sizing and selection, Wire and overcurrent protection sizing and selection, and energy storage sizing and selection it is necessary to have a maximum ambient temperature value in °C that these components are likely to be exposed to. It is not necessary to use the highest temperature ever recorded - the highest value during a multi-year period will suffice. The highest recorded temperature can be used, but may lead to the unnecessary oversizing of some system components.

Minimum ambient temperature

For PV source and charge controller sizing and selection it is necessary to have a minimum ambient temperature value in °C that these components are likely to be exposed to. It is not necessary to use the lowest temperature ever recorded - the lowest value during a multi-year period will suffice. The lowest recorded temperature can be used, but it is unlikely that the PV modules would see this temperature and be exposed to sunlight.

Maximum indoor temperature

For wire, overcurrent protection, and disconnect sizing and selection it is necessary to have a maximum indoor temperature in °C for the location where the system will be stored. This will have to be an estimate decided upon by the system designer.

Minimum indoor temperature

For energy storage sizing and selection it is necessary to have a minimum indoor temperature in °C for the location where the system will be stored. This will have to be an estimate decided upon by the designer based upon how well the batteries are protected from low temperatures. Even if the batteries are in a space without heating, they are unlikely to experience the minimum ambient temperature.

Obtaining temperature data

There are two recommended resources for obtaining weather data for sites:

PVGIS

European Union - Photovoltaic Geographical Information System A free and very detailed production modeling, system design tool and source for weather data that works in most locations globally. Also available in Spanish, French, and Italian.

• 

  (1) Select language (2) Select type of data - "TMY" (typical meteorological year). (3) Select the location using a name, GPS coordinates, or double-clicking. (4) Select period - most recent is recommended. (5) Select "Dry bulb temperature." (6) Click "View!" to see the data. (7) For more detailed information, click ".csv" to export it as a spreadsheet.

• 

  (8) Determine the minimum ambient temperature by using your mouse to locate the lowest or one of the lowest temperatures on the graph. (9) Determine the maximum ambient temperature by using your mouse to locate to the highest or one of the highest temperatures on the graph.

NASA Power Data Viewer

NASA - Power Data Viewer A detailed global irradiance/meteorological resource provided by the National Aeronautics and Space Administration (NASA) that provides data globally. It is capable of exporting data sets and creating unique maps. Only available in English.

• 

  (1) Select "Daily."(2) Select location on the map by clicking the pin (in red) or by entering GPS coordinates (3) Select period of time - a long period that is recent is ideal (4) Select data output type (only important if you intend to download the data) "ASCII" is a standard text document, "CSV" is a spreadsheet.

• 

  (5) Select Minimum and Maximum Temperature at 2 meters under Meteorology (Temperature). (6) Click "Submit"

• 

  (7) Select "Maximum Temperature at 2 meters. (8) This graph shows the maximum daily temperature during the selected time period. The red line has been added for emphasis. (9) This graph shows the frequency of various daily high temperatures during the selected time period. A maximum ambient temperature value should be chosen from this graph as well.

• 

  (9) Select "Minimum Temperature at 2 meters. (10) This graph shows the minimum daily temperature during the selected time period. The red line has been added for emphasis. (11) This graph shows the frequency of various daily low temperatures during the selected time period. A maximum ambient temperature value should be chosen from this graph.

Solar resource

For the purpose of PV system design, the solar resource for a given location is expressed as insolation in kWh/m². The insolation value for a location will vary each day throughout the year. For the purpose of sizing the PV source for an off-grid PV system the most relevant value is the monthly average insolation value for a location as compared to the monthly average energy requirement - this process is covered in the load and solar resource comparison. This value will be used to size the PV source to ensure that system can generate enough energy to meet the demands for all loads and to recharge the battery bank during periods of poor weather. It is very important to use a conservative insolation value for PV array sizing calculations.

For determining the days of autonomy for a PV system it can be worthwhile to look at data that is even more detailed than monthly averages. There may be weeks in place like the Amazon rainforest, where it rains continuously for a week straight and the solar resource is very minimal. A system in a location like this may require a larger PV source, additional storage, or another form of power generation.

Obtaining solar resource data

There are many different sources of solar resource data available - see Resources and the pages dedicated to specific countries. The most accurate measure of the solar resource in a given area is Global Horizontal Irradiance (GHI) that has been adjusted for the tilt and azimuth of the PV source. There are two good resources that for obtaining this particular data:

PVGIS

European Union - Photovoltaic Geographical Information System A free and very detailed production modeling, system design tool and source for weather data that works in most locations globally. Also available in Spanish, French, and Italian.

• 

  (1) Select language (2) Select type of data - "Monthly Data". (3) Select location the using a name, GPS coordinates, or double-clicking. (4) and (5) Select start and end year - the longer period of time the better. (6) Select "Global irradiation at angle:" and enter the intended tilt angle of the PV source. (7) Click "Visualize results." (8) For more detailed information, click ".csv" to export it as a spreadsheet.

• 

  (9) Navigate the graph using your mouse to determine the solar resource values. Use the values for each month when performing a load and solar resource comparison.

PVWatts

• National Renewable Energy Laboratories - PVWatts Calculator A free production modeling and system design tool from the National Renewable Energy Labs (NREL) that works in many areas around the world. Only available in English.

• 

  (1) Enter a location. (2) Click on "Go!"

• 

  (3) Make sure that there is a data source near the location.

• 

  (4) Verify that the location/data source are correct. (5) Click on "Go to system info."

• 

  (6) Input 1kW system size. This will make PVWatts output the correct values for system design. (7) Leave as "Standard." (8) Leave as "Fixed (open rack)." (9) Set to "0" as system losses will be accounted for elsewhere. (10) Set to the desired tilt. (11) Set to the desired azimuth. (12) Click on "Go to PVWatts results."

• 

  (13) The average monthly insolation values - in red - can be used for the load and solar resource comparison. The lowest monthly value is always of particular interest.