*'''Auto-load start:''' A charger can be set to start the generator automatically when the current required by loads exceeds a certain value to protect the battery bank from deep discharges. If this setting is to be used, it is important to make sure that a value is chosen that will not lead to the generator starting needlessly for brief periods of high current demand. It can be useful to automatically start the generator to run period large loads like well-pumps.
+
*'''Auto-start: load''' A charger can be set to start the generator automatically when the current required by loads exceeds a certain value to protect the energy storage system from deep discharges. If this setting is to be used, it is important to make sure that a value is chosen that will not lead to the generator starting needlessly for brief periods of high current demand. It can be useful to automatically start the generator to run period large loads like well-pumps.
Latest revision as of 14:02, 9 March 2021
Auto-start: load A charger can be set to start the generator automatically when the current required by loads exceeds a certain value to protect the energy storage system from deep discharges. If this setting is to be used, it is important to make sure that a value is chosen that will not lead to the generator starting needlessly for brief periods of high current demand. It can be useful to automatically start the generator to run period large loads like well-pumps.
