Difference between revisions of "Irradiance safety parameter"
Jump to navigation
Jump to search
(Created page with "Category:Design parameters The PV module degradation parameter is used in system design to account for the potential of PV module#irradiance|irradiance or sunlight inten...") |
|||
| Line 1: | Line 1: | ||
[[Category:Design parameters]] | [[Category:Design parameters]] | ||
| − | The PV module degradation parameter | + | The PV module degradation parameter accounts for the potential of [[PV module#irradiance|irradiance or sunlight intensity]] in excess of the 1000W/m² (the value that serves as the basis for testing and rating PV modules). This commonly occurs at higher altitudes. This value is a standard for PV design globally to make sure these components can handle the excess current generated by the [[PV module|PV source]]. |
*Irradiance safety parameter = 1.25 (125%) | *Irradiance safety parameter = 1.25 (125%) | ||
Revision as of 09:37, 13 November 2020
The PV module degradation parameter accounts for the potential of irradiance or sunlight intensity in excess of the 1000W/m² (the value that serves as the basis for testing and rating PV modules). This commonly occurs at higher altitudes. This value is a standard for PV design globally to make sure these components can handle the excess current generated by the PV source.
- Irradiance safety parameter = 1.25 (125%)
