Weather rating

Electrial equipment that comes in an enclosure will and enclosures intended for electrical equipment of any kind will be rated based upon the protection that the enclosure can provide against accidental contact and damage from the entrance of water or objects. It is important to check the rating any enclosure being considered to make sure that it is suitable for the location in which the equipment will be installed. There are two different rating systems that are commonly used globally: National Electrical Manufacturers Association (NEMA) rating and Ingress Protection (IP) rating. The two systems are very similar, but it is not possible to create a direct equivalency between the two.

Ingress protection

Code letters	First characteristic numeral: Solid particle protection	Second digit: Liquid ingress protection
IP (Ingress Protection)	Single numeral: 0–6 or letter X	Single numeral: 0–8 or letter X
Mandatory	Mandatory	Mandatory

Solid particle protection

Level sized	Effective against	Description
X	—	X means there is no data available to specify a protection rating with regard to this criterion.
0	—	No protection against contact and ingress of objects
1	50mm	Any large surface of the body, such as the back of a hand, but no protection against deliberate contact with a body part
2	12.5mm	Fingers or similar objects
3	2.5mm	Tools, thick wires, etc.
4	1mm	Most wires, slender screws, large ants etc.
5	Dust protected	Ingress of dust is not entirely prevented, but it must not enter in sufficient quantity to interfere with the satisfactory operation of the equipment.
6	Dust-tight	No ingress of dust; complete protection against contact (dust-tight). A vacuum must be applied. Test duration of up to 8 hours based on airflow.