Difference between revisions of "Translations:Weather rating/15/en"

Latest revision as of 15:03, 9 February 2021

Information about message (contribute)

This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.

Message definition (Weather rating)

{| class="wikitable"
! NEMA Type || Definition <ref name="nemaratings"/>
|-
| 1 || Indoor use. Protects against dust, light, and indirect splashing but is not dust-tight; primarily prevents contact with live parts; used indoors and under normal conditions.
|-
| 2 || Indoor use. Drip-tight. Similar to Type 1 but with addition of drip shields; used where condensation may be severe (as in cooling and laundry rooms).
|-
| 3 || Indoor or outdoor use. Weather-resistant. Protects against falling dirt and windblown dust, against weather hazards such as rain, sleet and snow, and is undamaged by the formation of ice. Used outdoors on ship docks, in construction work, and in tunnels and subways.
|-
| 3R || Same as 3, but does not include protection against windblown dust.
|-
| 3S || Same as 3, but also operable when laden with ice.
|-
| 3X, 3RX, 3SX || X indicates additional corrosion protection; commonly used near salt water.
|-
| 4 and 4X || Indoor or outdoor use. Watertight. Used outdoors on ship docks, in dairies, in wastewater treatment plants and breweries. X indicates additional corrosion resistance.
|-
| 5 || Indoor use. Dust-tight. Provided with gaskets or equivalent to exclude dust; used in steel mills and cement plants.
|-
| 6 and 6P || Indoor or outdoor use. Submersible. Design depends on specified conditions of pressure and time; submersible in water or oil; used in quarries, mines, and manholes. 6 is temporarily submersible, 6P withstands occasional prolonged submersion. Neither are intended for continuous submersion.
|-
| 12 and 12K || Indoor use. provides some protection against dust, falling dirt, and dripping non-corrosive liquids. Meets drip, dust, and rust resistance tests.
|-
| 13 || Indoor use. Primarily used to provide protection against dust, spraying of water and non-corrosive coolants. Meets oil exclusion and rust resistance design tests.
|}

{| class="wikitable"
! NEMA Type || Definition <ref name="nemaratings"/>
|-
| 1 || Indoor use. Protects against dust, light, and indirect splashing but is not dust-tight; primarily prevents contact with live parts; used indoors and under normal conditions.
|-
| 2 || Indoor use. Drip-tight. Similar to Type 1 but with addition of drip shields; used where condensation may be severe (as in cooling and laundry rooms).
|-
| 3 || Indoor or outdoor use. Weather-resistant. Protects against falling dirt and windblown dust, against weather hazards such as rain, sleet and snow, and is undamaged by the formation of ice.  Used outdoors on ship docks, in construction work, and in tunnels and subways.
|-
| 3R || Same as 3, but does not include protection against windblown dust.
|-
| 3S || Same as 3, but also operable when laden with ice.
|-
| 3X, 3RX, 3SX || X indicates additional corrosion protection; commonly used near salt water.
|-
| 4 and 4X || Indoor or outdoor use. Watertight. Used outdoors on ship docks, in dairies, in wastewater treatment plants and breweries. X indicates additional corrosion resistance.
|-
| 5 || Indoor use. Dust-tight. Provided with gaskets or equivalent to exclude dust; used in steel mills and cement plants.
|-
| 6 and 6P || Indoor or outdoor use. Submersible. Design depends on specified conditions of pressure and time; submersible in water or oil; used in quarries, mines, and manholes.  6 is temporarily submersible, 6P withstands occasional prolonged submersion.  Neither are intended for continuous submersion.
|-
| 12 and 12K || Indoor use. provides some protection against dust, falling dirt, and dripping non-corrosive liquids. Meets drip, dust, and rust resistance tests.
|-
| 13 || Indoor use. Primarily used to provide protection against dust, spraying of water and non-corrosive coolants. Meets oil exclusion and rust resistance design tests.
|}

Translation{| class="wikitable"
! NEMA Type || Definition <ref name="nemaratings"/>
|-
| 1 || Indoor use. Protects against dust, light, and indirect splashing but is not dust-tight; primarily prevents contact with live parts; used indoors and under normal conditions.
|-
| 2 || Indoor use. Drip-tight. Similar to Type 1 but with addition of drip shields; used where condensation may be severe (as in cooling and laundry rooms).
|-
| 3 || Indoor or outdoor use. Weather-resistant. Protects against falling dirt and windblown dust, against weather hazards such as rain, sleet and snow, and is undamaged by the formation of ice. Used outdoors on ship docks, in construction work, and in tunnels and subways.
|-
| 3R || Same as 3, but does not include protection against windblown dust.
|-
| 3S || Same as 3, but also operable when laden with ice.
|-
| 3X, 3RX, 3SX || X indicates additional corrosion protection; commonly used near salt water.
|-
| 4 and 4X || Indoor or outdoor use. Watertight. Used outdoors on ship docks, in dairies, in wastewater treatment plants and breweries. X indicates additional corrosion resistance.
|-
| 5 || Indoor use. Dust-tight. Provided with gaskets or equivalent to exclude dust; used in steel mills and cement plants.
|-
| 6 and 6P || Indoor or outdoor use. Submersible. Design depends on specified conditions of pressure and time; submersible in water or oil; used in quarries, mines, and manholes. 6 is temporarily submersible, 6P withstands occasional prolonged submersion. Neither are intended for continuous submersion.
|-
| 12 and 12K || Indoor use. provides some protection against dust, falling dirt, and dripping non-corrosive liquids. Meets drip, dust, and rust resistance tests.
|-
| 13 || Indoor use. Primarily used to provide protection against dust, spraying of water and non-corrosive coolants. Meets oil exclusion and rust resistance design tests.
|}

NEMA Type	Definition ^[1]
1	Indoor use. Protects against dust, light, and indirect splashing but is not dust-tight; primarily prevents contact with live parts; used indoors and under normal conditions.
2	Indoor use. Drip-tight. Similar to Type 1 but with addition of drip shields; used where condensation may be severe (as in cooling and laundry rooms).
3	Indoor or outdoor use. Weather-resistant. Protects against falling dirt and windblown dust, against weather hazards such as rain, sleet and snow, and is undamaged by the formation of ice. Used outdoors on ship docks, in construction work, and in tunnels and subways.
3R	Same as 3, but does not include protection against windblown dust.
3S	Same as 3, but also operable when laden with ice.
3X, 3RX, 3SX	X indicates additional corrosion protection; commonly used near salt water.
4 and 4X	Indoor or outdoor use. Watertight. Used outdoors on ship docks, in dairies, in wastewater treatment plants and breweries. X indicates additional corrosion resistance.
5	Indoor use. Dust-tight. Provided with gaskets or equivalent to exclude dust; used in steel mills and cement plants.
6 and 6P	Indoor or outdoor use. Submersible. Design depends on specified conditions of pressure and time; submersible in water or oil; used in quarries, mines, and manholes. 6 is temporarily submersible, 6P withstands occasional prolonged submersion. Neither are intended for continuous submersion.
12 and 12K	Indoor use. provides some protection against dust, falling dirt, and dripping non-corrosive liquids. Meets drip, dust, and rust resistance tests.
13	Indoor use. Primarily used to provide protection against dust, spraying of water and non-corrosive coolants. Meets oil exclusion and rust resistance design tests.

↑ Cite error: Invalid <ref> tag; no text was provided for refs named nemaratings

[nemaratings-1] Cite error: Invalid <ref> tag; no text was provided for refs named nemaratings

[1]

Difference between revisions of "Translations:Weather rating/15/en"

Latest revision as of 15:03, 9 February 2021

Navigation menu

Personal tools

Namespaces

Variants

Views

More

Search

Navigation

Tools

@@ Line 2: / Line 2: @@
 ! NEMA Type || Definition <ref name="nemaratings"/>
 |-
-| 1 || General-purpose. Protects against dust, light, and indirect splashing but is not dust-tight; primarily prevents contact with live parts; used indoors and under normal atmospheric conditions.
+| 1 || Indoor use. Protects against dust, light, and indirect splashing but is not dust-tight; primarily prevents contact with live parts; used indoors and under normal conditions.
 |-
-| 2 || Drip-tight. Similar to Type 1 but with addition of drip shields; used where condensation may be severe (as in cooling and laundry rooms).
+| 2 || Indoor use. Drip-tight. Similar to Type 1 but with addition of drip shields; used where condensation may be severe (as in cooling and laundry rooms).
 |-
-| 3 || Weather-resistant. Protects against falling dirt and windblown dust, against weather hazards such as rain, sleet and snow, and is undamaged by the formation of ice.  Used outdoors on ship docks, in construction work, and in tunnels and subways.
+| 3 || Indoor or outdoor use. Weather-resistant. Protects against falling dirt and windblown dust, against weather hazards such as rain, sleet and snow, and is undamaged by the formation of ice.  Used outdoors on ship docks, in construction work, and in tunnels and subways.
 |-
-| 3R || As 3, but ''omits'' protection against windblown dust.
+| 3R || Same as 3, but does not include protection against windblown dust.
 |-
-| 3S || As 3, but also operable when laden with ice.
+| 3S || Same as 3, but also operable when laden with ice.
 |-
 | 3X, 3RX, 3SX || X indicates additional corrosion protection; commonly used near salt water.
 |-
-| 4 and 4X || Watertight. Used outdoors on ship docks, in dairies, in wastewater treatment plants and breweries. X (as 4X) indicates additional corrosion resistance.
+| 4 and 4X || Indoor or outdoor use. Watertight. Used outdoors on ship docks, in dairies, in wastewater treatment plants and breweries. X indicates additional corrosion resistance.
 |-
-| 5 || Dust-tight. Provided with gaskets or equivalent to exclude dust; used in steel mills and cement plants.
+| 5 || Indoor use. Dust-tight. Provided with gaskets or equivalent to exclude dust; used in steel mills and cement plants.
 |-
-| 6 and 6P || Submersible. Design depends on specified conditions of pressure and time; submersible in water or oil; used in quarries, mines, and manholes.  6 is temporarily submersible, 6P withstands occasional prolonged submersion.  Neither are intended for continuous submersion.
+| 6 and 6P || Indoor or outdoor use. Submersible. Design depends on specified conditions of pressure and time; submersible in water or oil; used in quarries, mines, and manholes.  6 is temporarily submersible, 6P withstands occasional prolonged submersion.  Neither are intended for continuous submersion.
 |-
-| 7 || Certified and labelled for use in locations where specific fire or explosion hazards may exist.
+| 12 and 12K || Indoor use. provides some protection against dust, falling dirt, and dripping non-corrosive liquids. Meets drip, dust, and rust resistance tests.
 |-
-| 8 || Certified and labeled for indoor and outdoor use in locations where specific fire or explosion hazards may exist.
+| 13 || Indoor use. Primarily used to provide protection against dust, spraying of water and non-corrosive coolants. Meets oil exclusion and rust resistance design tests.
-|-
-| 9 || Certified and labelled for indoor and outdoor use in locations where specific fire or explosion hazards may exist.
-|-
-| 10 || Meets specific requires for use in mining applications in the United States.
-|-
-| 11 || General-purpose. Protects against the corrosive effects of liquids and gases. Meets drip and corrosion-resistance tests.
-|-
-| 12 and 12K || General-purpose. Intended for indoor use, provides some protection against dust, falling dirt, and dripping non-corrosive liquids. Meets drip, dust, and rust resistance tests.
-|-
-| 13 || General-purpose. Primarily used to provide protection against dust, spraying of water and non-corrosive coolants. Meets oil exclusion and rust resistance design tests.
 |}