Difference between revisions of "Simplified load evaluation"
Jump to navigation
Jump to search
| (10 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
[[Category:Simplified system design]] | [[Category:Simplified system design]] | ||
| − | The load evaluation involves gathering information on loads which will serve as the basis for the rest of the system design process. Power ratings and usage estimates for necessary and potential loads are gathered into | + | <languages /> |
| + | <translate> | ||
| + | <!--T:1--> | ||
| + | The load evaluation involves gathering information on loads which will serve as the basis for the rest of the system design process. Power ratings and usage estimates for necessary and potential loads are gathered into tables - one for direct current and one for alternating current. It is important to use maximum values for estimated usage to ensure that the system is adequately sized. If a system has extreme solar resource or load usage differences throughout the year, then it may be necessary to perform a [[Special:MyLanguage/Load and solar resource comparison|load and solar resource comparison]] from the detailed design process. | ||
| + | <!--T:2--> | ||
When designing any system, it is almost always necessary to explore various different designs with varying loads and usage patterns to arrive at the best balance between cost and budget. | When designing any system, it is almost always necessary to explore various different designs with varying loads and usage patterns to arrive at the best balance between cost and budget. | ||
| − | + | <!--T:3--> | |
| − | *If a system includes a refrigerator, it is necessary to follow the | + | '''Additional considerations:''' |
| + | |||
| + | <!--T:4--> | ||
| + | *If a system includes a refrigerator, it is necessary to follow the detailed system design process to properly account for [[Special:MyLanguage/Duty cycle|duty cycle]]. | ||
| + | |||
| + | <!--T:5--> | ||
*The make, model, and power rating of any loads currently present at the site should be documented. Photos are very useful. | *The make, model, and power rating of any loads currently present at the site should be documented. Photos are very useful. | ||
| − | *If the system design is going to incorporate loads that have not yet been purchased, guidance should be provided about the value and importance of purchasing [[Energy efficient loads|energy efficient loads]]. | + | |
| + | <!--T:6--> | ||
| + | *If the system design is going to incorporate loads that have not yet been purchased, guidance should be provided about the value and importance of purchasing [[Special:MyLanguage/Energy efficient loads|energy efficient loads]]. | ||
| + | |||
| + | <!--T:7--> | ||
*This process can be difficult in locations that do not currently have electricity or that have users that do not have experience with electricity beforehand. In these cases, there is a tendency to over-estimate and under-estimate appliance usage depending on the individual. The result is that more responsibility falls upon the person performing the load evaluation and the system designer to provide guidance and accurate estimates. | *This process can be difficult in locations that do not currently have electricity or that have users that do not have experience with electricity beforehand. In these cases, there is a tendency to over-estimate and under-estimate appliance usage depending on the individual. The result is that more responsibility falls upon the person performing the load evaluation and the system designer to provide guidance and accurate estimates. | ||
| − | |||
| − | ==DC load evaluation== | + | <!--T:8--> |
| − | Typical direct current loads include lights, cell phones, and radios. If a system incorporates an [[Inverter|inverter]], it is important that its [[Inverter#Idle consumption|idle consumption]] is included in the DC load evaluation. | + | *Potential projects that do not currently have an electrical system will also require additional evaluation and design work to ensure that the building will have adequate outlets for (power receptacles) and [[Special:MyLanguage/Lighting|lighting]] for the intended use of each room. |
| + | |||
| + | ==DC load evaluation== <!--T:9--> | ||
| + | |||
| + | <!--T:10--> | ||
| + | Typical direct current loads include lights, cell phones, and radios. If a system incorporates an [[Special:MyLanguage/Inverter|inverter]], it is important that its [[Special:MyLanguage/Inverter#Idle consumption|idle consumption]] is included in the DC load evaluation. | ||
| − | ====Step 1: Fill out DC load chart==== | + | ====Step 1: Fill out DC load chart==== <!--T:11--> |
| + | <!--T:12--> | ||
{| class="wikitable" style="text-align: center;" | {| class="wikitable" style="text-align: center;" | ||
!# | !# | ||
| Line 23: | Line 41: | ||
!Total watts | !Total watts | ||
!Hours per day | !Hours per day | ||
| − | ! | + | !Daily DC watt-hours |
|- | |- | ||
|1 | |1 | ||
| Line 106: | Line 124: | ||
|} | |} | ||
| + | <!--T:13--> | ||
*'''Load:''' The make and model or type of load. | *'''Load:''' The make and model or type of load. | ||
| + | |||
| + | <!--T:14--> | ||
*'''Quantity:''' The number of the particular load. | *'''Quantity:''' The number of the particular load. | ||
| + | |||
| + | <!--T:15--> | ||
*'''Watts:''' The power rating in watts of the load. | *'''Watts:''' The power rating in watts of the load. | ||
| + | |||
| + | <!--T:16--> | ||
*'''Total watts =''' Quantity × Watts | *'''Total watts =''' Quantity × Watts | ||
| + | |||
| + | <!--T:17--> | ||
*'''Hours per day:''' The maximum number of hours the load(s) will be operated per day. | *'''Hours per day:''' The maximum number of hours the load(s) will be operated per day. | ||
| − | |||
| − | ====Step 2: Determine DC energy demand==== | + | <!--T:18--> |
| + | *'''Daily DC watt-hours =''' Total watts × Hours per day | ||
| + | |||
| + | ====Step 2: Determine DC energy demand==== <!--T:19--> | ||
| + | <!--T:20--> | ||
{| class="wikitable" border=1 style="width: 80%;" | {| class="wikitable" border=1 style="width: 80%;" | ||
| − | ! style="width: 20%"|Total | + | ! style="width: 20%"|Total daily DC watt-hours |
| − | ! style="text-align:left;"| = sum of | + | ! style="text-align:left;"| = sum of Daily DC watt-hours for all loads |
|} | |} | ||
| − | ==AC load evaluation== | + | ==AC load evaluation== <!--T:21--> |
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | + | <!--T:22--> | |
| − | + | The AC load evaluation is important for determining the total amount of energy that is required for the system, but also to properly size the inverter so that it has sufficient power to be able to feed all of the loads. | |
| − | |||
| − | |||
| − | ====Step | + | ====Step 1: Fill out AC load chart==== <!--T:23--> |
| + | <!--T:24--> | ||
{| class="wikitable" style="text-align: center;" | {| class="wikitable" style="text-align: center;" | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
!# | !# | ||
!Load | !Load | ||
| Line 155: | Line 164: | ||
!Watts | !Watts | ||
!Total watts | !Total watts | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
!Hours per day | !Hours per day | ||
| − | ! | + | !Daily AC watt-hours |
| − | |||
|- | |- | ||
|1 | |1 | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| | | | ||
| | | | ||
| Line 185: | Line 176: | ||
|- | |- | ||
|2 | |2 | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| | | | ||
| | | | ||
| Line 202: | Line 184: | ||
|- | |- | ||
|3 | |3 | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| | | | ||
| | | | ||
| Line 219: | Line 192: | ||
|- | |- | ||
|4 | |4 | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| | | | ||
| | | | ||
| Line 236: | Line 200: | ||
|- | |- | ||
|5 | |5 | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| | | | ||
| | | | ||
| Line 253: | Line 208: | ||
|- | |- | ||
|6 | |6 | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| | | | ||
| | | | ||
| Line 269: | Line 215: | ||
|- | |- | ||
|7 | |7 | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| | | | ||
| | | | ||
| Line 286: | Line 223: | ||
|- | |- | ||
|8 | |8 | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| | | | ||
| | | | ||
| Line 303: | Line 231: | ||
|- | |- | ||
|9 | |9 | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| | | | ||
| | | | ||
| Line 320: | Line 239: | ||
|- | |- | ||
|10 | |10 | ||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| − | |||
| | | | ||
| | | | ||
| Line 337: | Line 247: | ||
|} | |} | ||
| + | <!--T:25--> | ||
*'''Load:''' The make and model or type of load. | *'''Load:''' The make and model or type of load. | ||
*'''Quantity:''' The number of the particular load. | *'''Quantity:''' The number of the particular load. | ||
*'''Watts:''' The power rating in watts for the load. | *'''Watts:''' The power rating in watts for the load. | ||
*'''Total watts =''' Quantity × Watts | *'''Total watts =''' Quantity × Watts | ||
| − | |||
| − | |||
| − | |||
| − | |||
*'''Hours per day:''' The maximum number of hours the load(s) will be operated per day. If the load has a duty cycle 24 hours should be used. | *'''Hours per day:''' The maximum number of hours the load(s) will be operated per day. If the load has a duty cycle 24 hours should be used. | ||
*'''Days per week:''' The maximum number of days the load(s) will be operated per week. | *'''Days per week:''' The maximum number of days the load(s) will be operated per week. | ||
| − | *''' | + | *'''Daily AC watt-hours =''' Total watts × Duty cycle × Hours per day |
| − | ====Step | + | ====Step 2: Determine AC energy demand==== <!--T:26--> |
| + | The total energy demand for all loads must be added up and then it must be multiplied by the average efficiency of the inverter to determine the actual total energy requirement. Inverter efficiency should be assumed to be .85 (85%). Some inverters will list higher peak efficiencies, but they will not achieve that level of efficiency under normal usage. | ||
| + | <!--T:28--> | ||
{| class="wikitable" border=1 style="width: 80%;" | {| class="wikitable" border=1 style="width: 80%;" | ||
| − | ! style="width: 20%"|Total | + | ! style="width: 20%"|Total daily AC watt-hours |
| − | ! style="text-align:left;"| = sum of | + | ! style="text-align:left;"| = sum of Daily AC watt-hours for all loads ÷ [[Special:MyLanguage/Inverter#Efficiency|Inverter efficiency]] |
|} | |} | ||
| − | + | ====Step 3: Determine AC power requirement==== <!--T:29--> | |
| − | |||
| − | |||
| − | |||
| − | + | <!--T:30--> | |
{| class="wikitable" border=1 style="width: 80%;" | {| class="wikitable" border=1 style="width: 80%;" | ||
| − | ! style="width: 20%"|Total | + | ! style="width: 20%"|Total AC connected watts |
| − | ! style="text-align:left;"| = sum of | + | ! style="text-align:left;"| = sum of Total watts for all of the loads |
|} | |} | ||
| − | + | ==Total daily energy demand== <!--T:31--> | |
| − | |||
| − | ! | ||
| − | |||
| − | + | <!--T:32--> | |
| − | The total energy demand for the system is the added | + | The total energy demand for the system is the added Daily DC-watt hours and Daily AC watt-hours. |
| + | <!--T:33--> | ||
{| class="wikitable" border=1 style="width: 80%;" | {| class="wikitable" border=1 style="width: 80%;" | ||
| − | ! style="width: 20%"| | + | ! style="width: 20%"|Daily watt-hours required |
| − | ! style="text-align:left;"| = Total | + | ! style="text-align:left;"| = Total daily DC watt-hours + Total daily AC watt-hours |
|} | |} | ||
| − | + | ==Notes/references== <!--T:34--> | |
| − | ! | + | </translate> |
| − | |||
| − | |||
Latest revision as of 14:44, 24 March 2021
The load evaluation involves gathering information on loads which will serve as the basis for the rest of the system design process. Power ratings and usage estimates for necessary and potential loads are gathered into tables - one for direct current and one for alternating current. It is important to use maximum values for estimated usage to ensure that the system is adequately sized. If a system has extreme solar resource or load usage differences throughout the year, then it may be necessary to perform a load and solar resource comparison from the detailed design process.
When designing any system, it is almost always necessary to explore various different designs with varying loads and usage patterns to arrive at the best balance between cost and budget.
Additional considerations:
- If a system includes a refrigerator, it is necessary to follow the detailed system design process to properly account for duty cycle.
- The make, model, and power rating of any loads currently present at the site should be documented. Photos are very useful.
- If the system design is going to incorporate loads that have not yet been purchased, guidance should be provided about the value and importance of purchasing energy efficient loads.
- This process can be difficult in locations that do not currently have electricity or that have users that do not have experience with electricity beforehand. In these cases, there is a tendency to over-estimate and under-estimate appliance usage depending on the individual. The result is that more responsibility falls upon the person performing the load evaluation and the system designer to provide guidance and accurate estimates.
- Potential projects that do not currently have an electrical system will also require additional evaluation and design work to ensure that the building will have adequate outlets for (power receptacles) and lighting for the intended use of each room.
Contents
DC load evaluation
Typical direct current loads include lights, cell phones, and radios. If a system incorporates an inverter, it is important that its idle consumption is included in the DC load evaluation.
Step 1: Fill out DC load chart
| # | Load | Quantity | Watts | Total watts | Hours per day | Daily DC watt-hours |
|---|---|---|---|---|---|---|
| 1 | ||||||
| 2 | ||||||
| 3 | ||||||
| 4 | ||||||
| 5 | ||||||
| 6 | ||||||
| 7 | ||||||
| 8 | ||||||
| 9 | ||||||
| 10 |
- Load: The make and model or type of load.
- Quantity: The number of the particular load.
- Watts: The power rating in watts of the load.
- Total watts = Quantity × Watts
- Hours per day: The maximum number of hours the load(s) will be operated per day.
- Daily DC watt-hours = Total watts × Hours per day
Step 2: Determine DC energy demand
| Total daily DC watt-hours | = sum of Daily DC watt-hours for all loads |
|---|
AC load evaluation
The AC load evaluation is important for determining the total amount of energy that is required for the system, but also to properly size the inverter so that it has sufficient power to be able to feed all of the loads.
Step 1: Fill out AC load chart
| # | Load | Quantity | Watts | Total watts | Hours per day | Daily AC watt-hours |
|---|---|---|---|---|---|---|
| 1 | ||||||
| 2 | ||||||
| 3 | ||||||
| 4 | ||||||
| 5 | ||||||
| 6 | ||||||
| 7 | ||||||
| 8 | ||||||
| 9 | ||||||
| 10 |
- Load: The make and model or type of load.
- Quantity: The number of the particular load.
- Watts: The power rating in watts for the load.
- Total watts = Quantity × Watts
- Hours per day: The maximum number of hours the load(s) will be operated per day. If the load has a duty cycle 24 hours should be used.
- Days per week: The maximum number of days the load(s) will be operated per week.
- Daily AC watt-hours = Total watts × Duty cycle × Hours per day
Step 2: Determine AC energy demand
The total energy demand for all loads must be added up and then it must be multiplied by the average efficiency of the inverter to determine the actual total energy requirement. Inverter efficiency should be assumed to be .85 (85%). Some inverters will list higher peak efficiencies, but they will not achieve that level of efficiency under normal usage.
| Total daily AC watt-hours | = sum of Daily AC watt-hours for all loads ÷ Inverter efficiency |
|---|
Step 3: Determine AC power requirement
| Total AC connected watts | = sum of Total watts for all of the loads |
|---|
Total daily energy demand
The total energy demand for the system is the added Daily DC-watt hours and Daily AC watt-hours.
| Daily watt-hours required | = Total daily DC watt-hours + Total daily AC watt-hours |
|---|
