Difference between revisions of "Twist-on wire connector"

From Open Source Solar Project
Jump to navigation Jump to search
m (Alex moved page Twist on wire connector to Twist-on wire connector without leaving a redirect)
(Marked this version for translation)
 
(3 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
[[Category:Power distribution]]
 
[[Category:Power distribution]]
 +
<languages />
 +
<translate>
 +
<!--T:1-->
 
[[File:Twistonwireconnectors210101.png|thumb|''Above -''Twist-on wire connectors by size and color.<br />''Below -'' Cross-section of a connector with wires entering.]]
 
[[File:Twistonwireconnectors210101.png|thumb|''Above -''Twist-on wire connectors by size and color.<br />''Below -'' Cross-section of a connector with wires entering.]]
−
Twist-on wire connectors are commonly available and cheap way to make connections in circuits. They come in various sizes that are color coded but are only typically used for smaller circuits with wires that are 6 mm² (10 AWG) and smaller. They consist of a plastic body with a threaded spring inside. Two or more wires can be inserted into the connector and then it can be twisted, it will tighten around the wires and create a solid connection.
 
  
−
===Considerations===
+
<!--T:2-->
−
*Twist on connectors should always be located inside of a [[Junction box|junction box]] or another type of enclosure to ensure that they are protected against damage or unauthorized access.
+
Twist-on wire connectors are commonly available and cheap way to make connections in circuits. They come in various sizes that are color coded but are only typically used for smaller circuits with wires that are 6 mm² (10 AWG) and smaller. They consist of a plastic body with a threaded spring inside. Two or more wires - solid or stranded - can be inserted into the connector and then it can be twisted, it will tighten around the wires and create a solid connection.
 +
 
 +
===Considerations=== <!--T:3-->
 +
 
 +
<!--T:4-->
 +
*Twist on connectors should always be located inside of a [[Special:MyLanguage/Junction box|junction box]] or another type of enclosure to ensure that they are protected against damage or unauthorized access.
 
*The wires entering a twist-on connector should always be tugged on after installation to make verify that the connection is solid and will not come loose later on.
 
*The wires entering a twist-on connector should always be tugged on after installation to make verify that the connection is solid and will not come loose later on.
−
*The appropriate size connector must be used for the wires that are being connected. Larger wire nuts can accept multiple smaller wires, but they are only designed to accept two of the largest wire that is shown in the chart below.
+
*The appropriate size connector must be used for the wires that are being connected. Larger wire nuts can accept multiple smaller wires.
  
 +
<!--T:5-->
 
{| border="2" align="center" class="wikitable"
 
{| border="2" align="center" class="wikitable"
 
! rowspan=3|Color
 
! rowspan=3|Color
Line 74: Line 82:
 
|}
 
|}
  
−
==Notes/references==
+
==Notes/references== <!--T:6-->
 
<references/>
 
<references/>
 +
</translate>

Latest revision as of 12:44, 12 February 2021

Other languages:
English • ‎español
Above -Twist-on wire connectors by size and color.
Below - Cross-section of a connector with wires entering.

Twist-on wire connectors are commonly available and cheap way to make connections in circuits. They come in various sizes that are color coded but are only typically used for smaller circuits with wires that are 6 mm² (10 AWG) and smaller. They consist of a plastic body with a threaded spring inside. Two or more wires - solid or stranded - can be inserted into the connector and then it can be twisted, it will tighten around the wires and create a solid connection.

Considerations

  • Twist on connectors should always be located inside of a junction box or another type of enclosure to ensure that they are protected against damage or unauthorized access.
  • The wires entering a twist-on connector should always be tugged on after installation to make verify that the connection is solid and will not come loose later on.
  • The appropriate size connector must be used for the wires that are being connected. Larger wire nuts can accept multiple smaller wires.
Color Wire size[1]
22 AWG
(0.326 mm²) 		20 AWG
(0.581 mm²) 		18 AWG
(0.823 mm²) 		16 AWG
(1.31 mm²) 		14 AWG
(2.08 mm²) 		12 AWG
(3.31 mm²) 		10 AWG
(5.26 mm²)
0.5 mm² 0.75 mm² 1 mm² 1.5 mm² 2.5 mm² 4 mm² 6 mm²
Gray
Blue
Orange
Yellow
Red

Notes/references

  1. ↑ Ideal Wirenut Connectors http://www.customwirestripping.com/ideal-electrical/us/en/products/wire-termination/10-twist-on-wire-connectors/a-wire-nut-wire-connectors.aspx
Retrieved from "http://www.opensourcesolar.org/w/index.php?title=Twist-on_wire_connector&oldid=7932"