Difference between revisions of "Translations:Distribution panel/2/en"

From Open Source Solar Project
Jump to navigation Jump to search
(Importing a new version from external source)
 
(Importing a new version from external source)
Line 1: Line 1:
−
In an off-grid PV system, the output of a power soure - AC or DC - that will be used to supply multiple loads will typically pass through a distribution panel that will have [[Special:MyLanguage/Overcurrent protection|overcurrent protection devices]] that will allow small diameter wires to be run to outlets, lighting and other loads. There will also typically be [[Special:MyLanguage/Busbar|busbars]] for [[Special:MyLanguage/Grounding system|equipment grounding conductors]] and grounded conductors (AC neutral). A distribution panel may be a traditional distribution panel like is commonly seen in grid-connected electrical systems (as depicted in the graphic) or it may be a specifically designed for use in off-grid PV applications. They may differ in appearance, but the purpose and function is the same. A distribution panel must be suitable for the conditions in which it will be used including:
+
In an off-grid PV system, the power coming from [[Special:MyLanguage/Electricity types|alternating current (AC)]] and [[Special:MyLanguage/Electricity types|direct current (DC)]]  power sources that will be used to supply loads will typically pass through a distribution panel that will have [[Special:MyLanguage/Overcurrent protection|overcurrent protection devices]] that will allow small diameter wires to be run to outlets, lighting and other loads. There will also typically be [[Special:MyLanguage/Busbar|busbars]] for [[Special:MyLanguage/Grounding system|equipment grounding conductors]] and grounded conductors (AC neutral). A distribution panel may be a traditional distribution panel like is commonly seen in grid-connected electrical systems (as depicted in the graphic) or it may be a specifically designed for use in off-grid PV applications. They may differ in appearance, but the purpose and function is the same. A distribution panel must be suitable for the conditions in which it will be used including:

Revision as of 10:39, 12 February 2021

Information about message (contribute)
This message has no documentation. If you know where or how this message is used, you can help other translators by adding documentation to this message.
Message definition (Distribution panel)
In an off-grid PV system, the output of a power soure - AC or DC - that will be used to supply multiple loads will typically pass through a distribution panel that will have [[Special:MyLanguage/Overcurrent protection|overcurrent protection devices]] that will allow small diameter wires to be run to outlets, lighting and other loads. There will also typically be [[Special:MyLanguage/Busbar|busbars]] for [[Special:MyLanguage/Grounding system|equipment grounding conductors]] and grounded conductors (AC neutral). A distribution panel may be a traditional distribution panel like is commonly seen in grid-connected electrical systems (as depicted in the graphic) or it may be a specifically designed for use in off-grid PV applications. They may differ in appearance, but the purpose and function is the same. A distribution panel must be suitable for the conditions in which it will be used including:
TranslationIn an off-grid PV system, the power coming from [[Special:MyLanguage/Electricity types|alternating current (AC)]] and [[Special:MyLanguage/Electricity types|direct current (DC)]]  power sources that will be used to supply loads will typically pass through a distribution panel that will have [[Special:MyLanguage/Overcurrent protection|overcurrent protection devices]] that will allow small diameter wires to be run to outlets, lighting and other loads. There will also typically be [[Special:MyLanguage/Busbar|busbars]] for [[Special:MyLanguage/Grounding system|equipment grounding conductors]] and grounded conductors (AC neutral). A distribution panel may be a traditional distribution panel like is commonly seen in grid-connected electrical systems (as depicted in the graphic) or it may be a specifically designed for use in off-grid PV applications. They may differ in appearance, but the purpose and function is the same. A distribution panel must be suitable for the conditions in which it will be used including:

In an off-grid PV system, the power coming from alternating current (AC) and direct current (DC) power sources that will be used to supply loads will typically pass through a distribution panel that will have overcurrent protection devices that will allow small diameter wires to be run to outlets, lighting and other loads. There will also typically be busbars for equipment grounding conductors and grounded conductors (AC neutral). A distribution panel may be a traditional distribution panel like is commonly seen in grid-connected electrical systems (as depicted in the graphic) or it may be a specifically designed for use in off-grid PV applications. They may differ in appearance, but the purpose and function is the same. A distribution panel must be suitable for the conditions in which it will be used including:

Retrieved from "http://www.opensourcesolar.org/w/index.php?title=Translations:Distribution_panel/2/en&oldid=7811"