Difference between revisions of "Simplified PWM charge controller sizing and selection"
Jump to navigation
Jump to search
| (4 intermediate revisions by the same user not shown) | |||
| Line 1: | Line 1: | ||
[[Category:Simplified system design]] | [[Category:Simplified system design]] | ||
| − | A [[Charge controller#Charge controller types|PWM charge controller]] is rated to operate at a particular [[DC system voltage]] and maximum current. [[PV module|PV modules]] designed to work at the DC system voltage must be connected in parallel PV source circuits in order to achieve the [[PV source | + | <languages /> |
| + | <translate> | ||
| + | <!--T:1--> | ||
| + | A [[Special:MyLanguage/Charge controller#Charge controller types|PWM charge controller]] is rated to operate at a particular [[Special:MyLanguage/DC system voltage|DC system voltage]] and maximum current. [[Special:MyLanguage/PV module|PV modules]] designed to work at the DC system voltage must be connected in parallel PV source circuits in order to achieve the [[Special:MyLanguage/Simplified minimum PV source size|minimum PV source size]] and the charge controller therefore must be sized to handle this amount of current. If the current rating of a PWM charge controller is exceeded, it can be damaged or destroyed. | ||
| − | ====Step 1: Determine PV module power rating and series configuration==== | + | ====Step 1: Determine PV module power rating and series configuration==== <!--T:2--> |
| − | The chosen [[DC system voltage]] limits the choices of modules and configurations that are possible with a PWM charge controller. Below is a table of the number of modules that can be connected in series for each PV source circuit depending upon the DC system voltage. | + | The chosen [[Special:MyLanguage/DC system voltage|DC system voltage]] limits the choices of modules and configurations that are possible with a PWM charge controller. Below is a table of the number of modules that can be connected in series for each PV source circuit depending upon the DC system voltage. |
| + | <!--T:3--> | ||
{| class="wikitable" border=1 | {| class="wikitable" border=1 | ||
| − | ![[DC system voltage]] | + | ![[Special:MyLanguage/DC system voltage|DC system voltage]] |
!36 cell module | !36 cell module | ||
!60 cell module | !60 cell module | ||
| Line 27: | Line 31: | ||
|} | |} | ||
| + | <!--T:4--> | ||
{| class="wikitable" border=1 style="width: 80%;" | {| class="wikitable" border=1 style="width: 80%;" | ||
! style="width: 20%"|PV module power rating | ! style="width: 20%"|PV module power rating | ||
| Line 32: | Line 37: | ||
|} | |} | ||
| + | <!--T:5--> | ||
{| class="wikitable" border=1 style="width: 80%;" | {| class="wikitable" border=1 style="width: 80%;" | ||
! style="width: 20%"|Number of modules in series | ! style="width: 20%"|Number of modules in series | ||
| Line 37: | Line 43: | ||
|} | |} | ||
| − | ====Step 2: Determine proposed module configuration==== | + | ====Step 2: Determine proposed PV module configuration==== <!--T:6--> |
This calculation will give a ''minimum'' number of PV modules - the result should always be rounded up. Different modules sizes and configurations can be explored to find the optimal design. | This calculation will give a ''minimum'' number of PV modules - the result should always be rounded up. Different modules sizes and configurations can be explored to find the optimal design. | ||
{| class="wikitable" border=1 style="width: 80%;" | {| class="wikitable" border=1 style="width: 80%;" | ||
! style="width: 20%"|Number of PV modules | ! style="width: 20%"|Number of PV modules | ||
| − | ! style="text-align:left;"| = [[Simplified minimum PV source size|Temperature adjusted minimum PV source size]] ÷ PV module power rating (Step 1) | + | ! style="text-align:left;"| = [[Special:MyLanguage/Simplified minimum PV source size|Temperature adjusted minimum PV source size]] ÷ PV module power rating (Step 1) |
|} | |} | ||
| + | <!--T:7--> | ||
The final number of PV modules should always be larger than this value - the result should always be rounded up. | The final number of PV modules should always be larger than this value - the result should always be rounded up. | ||
| + | <!--T:8--> | ||
{| class="wikitable" border=1 style="width: 80%;" | {| class="wikitable" border=1 style="width: 80%;" | ||
! style="width: 20%"|Number of PV source circuits | ! style="width: 20%"|Number of PV source circuits | ||
| Line 51: | Line 59: | ||
|} | |} | ||
| − | ====Step 3: Total PV source current==== | + | ====Step 3: Total PV source current==== <!--T:9--> |
This calculation will give a minimum current rating to use as a basis for selecting the charge controller. The Isc rating of the PV module can be found on its specifications sheet. This value is multiplied by a required 1.25 safety factor to make sure the charge controller can handle periods of excessive current due to high irradiance. | This calculation will give a minimum current rating to use as a basis for selecting the charge controller. The Isc rating of the PV module can be found on its specifications sheet. This value is multiplied by a required 1.25 safety factor to make sure the charge controller can handle periods of excessive current due to high irradiance. | ||
{| class="wikitable" border=1 style="width: 80%;" | {| class="wikitable" border=1 style="width: 80%;" | ||
! style="width: 20%"|Total PV source current | ! style="width: 20%"|Total PV source current | ||
| − | ! style="text-align:left;"| = Final number of PV source circuits (Step 2) × [[PV module|Isc rating]] of chosen module (Step 1) × 1.25 | + | ! style="text-align:left;"| = Final number of PV source circuits (Step 2) × [[Special:MyLanguage/PV module|Isc rating]] of chosen module (Step 1) × 1.25 |
|} | |} | ||
| − | ====Step 4: Select a charge controller==== | + | ====Step 4: Select a charge controller==== <!--T:10--> |
A single charge controller is the simplest and cheapest option, but for larger systems multiple charge controllers often are used in parallel. The final chosen charge controller should: | A single charge controller is the simplest and cheapest option, but for larger systems multiple charge controllers often are used in parallel. The final chosen charge controller should: | ||
| − | #Function at the [[DC system voltage]]. | + | #Function at the [[Special:MyLanguage/DC system voltage|DC system voltage]]. |
#The charge controller(s) should have a total current rating that is larger than the minimum current rating (Step 2). Common charge controller current ratings: 4.5 A, 5 A, 6 A, 10 A, 12 A, 15 A, 20 A, 25 A, 30 A, 35 A, 40 A, 45 A, 50 A, 55 A, 60 A. | #The charge controller(s) should have a total current rating that is larger than the minimum current rating (Step 2). Common charge controller current ratings: 4.5 A, 5 A, 6 A, 10 A, 12 A, 15 A, 20 A, 25 A, 30 A, 35 A, 40 A, 45 A, 50 A, 55 A, 60 A. | ||
| − | + | <!--T:11--> | |
{| class="wikitable" border=1 style="width: 80%;" | {| class="wikitable" border=1 style="width: 80%;" | ||
| − | ! style="width: 20%"| | + | ! style="width: 20%"|Final charge controller current rating |
! style="text-align:left;"| = | ! style="text-align:left;"| = | ||
|} | |} | ||
| + | <!--T:12--> | ||
The result of the following equation should always be rounded up. | The result of the following equation should always be rounded up. | ||
| + | <!--T:13--> | ||
{| class="wikitable" border=1 style="width: 80%;" | {| class="wikitable" border=1 style="width: 80%;" | ||
! style="width: 20%"|Number of charge controllers | ! style="width: 20%"|Number of charge controllers | ||
| − | ! style="text-align:left;"| = Total PV source current (Step 3) ÷ | + | ! style="text-align:left;"| = Total PV source current (Step 3) ÷ Final chosen charge controller current rating |
|} | |} | ||
| − | ====Step 5: Determine final PV source power rating==== | + | ====Step 5: Determine final PV source power rating==== <!--T:14--> |
The total power rating of the PV source can be calculated by multiplying the power rating of the chosen PV module by the final number of PV modules (Step 3). | The total power rating of the PV source can be calculated by multiplying the power rating of the chosen PV module by the final number of PV modules (Step 3). | ||
{| class="wikitable" border=1 style="width: 80%;" | {| class="wikitable" border=1 style="width: 80%;" | ||
| Line 83: | Line 93: | ||
|} | |} | ||
| − | ==Notes/references== | + | ==Notes/references== <!--T:15--> |
<references/> | <references/> | ||
| + | </translate> | ||
Latest revision as of 16:11, 6 April 2021
A PWM charge controller is rated to operate at a particular DC system voltage and maximum current. PV modules designed to work at the DC system voltage must be connected in parallel PV source circuits in order to achieve the minimum PV source size and the charge controller therefore must be sized to handle this amount of current. If the current rating of a PWM charge controller is exceeded, it can be damaged or destroyed.
Contents
Step 1: Determine PV module power rating and series configuration
The chosen DC system voltage limits the choices of modules and configurations that are possible with a PWM charge controller. Below is a table of the number of modules that can be connected in series for each PV source circuit depending upon the DC system voltage.
| DC system voltage | 36 cell module | 60 cell module | 72 cell module |
|---|---|---|---|
| 12 V | 1 | — | — |
| 24 V | 2 | — | 1 |
| 48 V | 4 | — | 2 |
| PV module power rating | = |
|---|
| Number of modules in series | = |
|---|
Step 2: Determine proposed PV module configuration
This calculation will give a minimum number of PV modules - the result should always be rounded up. Different modules sizes and configurations can be explored to find the optimal design.
| Number of PV modules | = Temperature adjusted minimum PV source size ÷ PV module power rating (Step 1) |
|---|
The final number of PV modules should always be larger than this value - the result should always be rounded up.
| Number of PV source circuits | = Minimum number of PV modules ÷ Number of modules in series (Step 1) |
|---|
Step 3: Total PV source current
This calculation will give a minimum current rating to use as a basis for selecting the charge controller. The Isc rating of the PV module can be found on its specifications sheet. This value is multiplied by a required 1.25 safety factor to make sure the charge controller can handle periods of excessive current due to high irradiance.
| Total PV source current | = Final number of PV source circuits (Step 2) × Isc rating of chosen module (Step 1) × 1.25 |
|---|
Step 4: Select a charge controller
A single charge controller is the simplest and cheapest option, but for larger systems multiple charge controllers often are used in parallel. The final chosen charge controller should:
- Function at the DC system voltage.
- The charge controller(s) should have a total current rating that is larger than the minimum current rating (Step 2). Common charge controller current ratings: 4.5 A, 5 A, 6 A, 10 A, 12 A, 15 A, 20 A, 25 A, 30 A, 35 A, 40 A, 45 A, 50 A, 55 A, 60 A.
| Final charge controller current rating | = |
|---|
The result of the following equation should always be rounded up.
| Number of charge controllers | = Total PV source current (Step 3) ÷ Final chosen charge controller current rating |
|---|
Step 5: Determine final PV source power rating
The total power rating of the PV source can be calculated by multiplying the power rating of the chosen PV module by the final number of PV modules (Step 3).
| PV source power rating | = PV module power rating (Step 1) × Final number of PV modules (Step 3) |
|---|
